CCNA

CCNA Training in Mussafah

CCNA Routing & Switching – 200-125 (30 Hours)

Modul-1
1. Network Fundamentals
1.1 Compare and contrast OSI and TCP/IP models
1.2 Compare and contrast TCP and UDP protocols
1.3 Describe the impact of infrastructure components in an enterprise network
1.4 Describe the effects of cloud resources on enterprise network architecture
1.5 Compare and contrast collapsed core and three-tier architectures
1.6 Compare and contrast network topologies
1.7 Select the appropriate cabling type based on implementation requirements
1.8 Apply troubleshooting methodologies to resolve problems
1.9 Configure, verify, and troubleshoot IPv4 addressing and sub-netting
1.10 Compare and contrast IPv4 address types
1.11 Describe the need for private IPv4 addressing
1.12 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
1.13 Configure, verify, and troubleshoot IPv6 addressing
1.14 Configure and verify IPv6 Stateless Address Auto Configuration
1.15 Compare and contrast IPv6 address types

Modul-3
3. Routing Technologies
3.1 Describe the routing concepts
3.2 Interpret the components of a routing table
3.3 Describe how a routing table is populated by different routing information sources
3.4 Configure, verify, and troubleshoot inter-VLAN routing
3.5 Compare and contrast static routing and dynamic routing
3.6 Compare and contrast distance vector and link state routing protocols
3.7 Compare and contrast interior and exterior routing protocols
3.8 Configure, verify, and troubleshoot IPv4 and IPv6 static routing
3.9 Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4
3.10 Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6
3.11 Configure, verify, and troubleshoot EIGRP for IPv4
3.12 Configure, verify, and troubleshoot EIGRP for IPv6
3.13 Configure, verify, and troubleshoot RIPv2 for IPv4
3.14 Troubleshoot basic Layer 3 end-to-end connectivity issues

Modul-2
2. LAN Switching Technologies
2.1 Describe and verify switching concepts
2.2 Interpret Ethernet frame format
2.3 Troubleshoot interface and cable issues (collisions, errors, duplex, and speed)
2.4 Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
2.5 Configure, verify, and troubleshoot inter switch connectivity
2.6 Configure, verify, and troubleshoot STP protocols
2.7 Configure, verify and troubleshoot STP related optional features
2.8 Configure and verify Layer 2 protocols
2.9 Configure, verify, and troubleshoot (Layer 2/Layer 3) Ether-Channel
2.10 Describe the benefits of switch stacking and chassis aggregation

Modul-4
4. WAN Technologies
4.1 Configure and verify PPP and MLPPP on WAN interfaces using local authentication
4.2 Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
4.3 Configure, verify, and troubleshoot GRE tunnel connectivity
4.4 Describe WAN topology options
4.5 Describe WAN access connectivity options
4.6 Configure and verify single-homed branch connectivity using eBGP IPv4
4.7 Describe basic QoS concepts

Modul-5
5. Infrastructure Services
5.1 Describe DNS lookup operation
5.2 Troubleshoot client connectivity issues involving DNS
5.3 Configure and verify DHCP on a router (excluding static reservations)
5.4 Troubleshoot client- and router-based DHCP connectivity issue
5.5 Configure, verify, and troubleshoot basic HSRP
5.6 Configure, verify, and troubleshoot inside source NAT
5.7 Configure and verify NTP operating in a client/server mode

Modul-6
6. Infrastructure Security
6.1 Configure, verify, and troubleshoot port security
6.2 Describe common access layer threat mitigation techniques
6.3 Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
6.4 Verify ACLs using the APIC-EM Path Trace ACL analysis tool
6.5 Configure, verify, and troubleshoot basic device hardening
6.6 Describe device security using AAA with TACACS+ and RADIUS

Modul-7
7. Infrastructure Management
7.1 Configure and verify device-monitoring protocols
7.2 Troubleshoot network connectivity issues using ICMP echo-based IP SLA
7.3 Configure and verify device management
7.4 Configure and verify initial device configuration
7.5 Perform device maintenance
7.6 Use Cisco IOS tools to troubleshoot and resolve problems
7.7 Describe network programmability in enterprise network architecture

CCNA Security -The Implementing Cisco Network Security (IINS) – 210-260 (30 Hours)

Modul-1
Introduction
Modul-2
Networking Security Concepts
Modul-3
Common Security Threats
Modul-4
Implementing AAA in Cisco IOS
Modul-5
Bring Your Own Device (BYOD)
Modul-6
Fundamentals of VPN Technology and Cryptography
Modul-7
Fundamentals of IP Security
Modul-8
Implementing IPsec Site-to-Site VPNs
Modul-9
Implementing SSL VPNs Using Cisco ASA

Modul-10
Securing Layer 2 Technologies
Modul-11
Network Foundation Protection
Modul-12
Securing the Management Plane on Cisco IOS Devices
Modul-13
Securing the Data Plane in IPv6
Modul-14
Securing Routing Protocols and the Control Plane
Modul-15
Understanding Firewall Fundamentals
Modul-16
Implementing Cisco IOS Zone-Based Firewalls
Modul-17
Configuring Basic Firewall Policies on Cisco ASA
Modul-18
Cisco IDS/IPS Fundamentals

Modul-19
Mitigation Technologies for E-mail-Based and Web-Based Threats

Modul-20
Mitigation Technologies for Endpoint Threats

Enquire About the Course